Speaking of sludge dewatering, because sludge has a high calorific value; Rich in nutrients; High heavy metal content; Fecal coliform value exceeds the requirements of resource utilization standard; High moisture content of sludge is difficult to treat. After adding flocculant, even after mechanical dehydration treatment such as plate frame and belt machine, its water content is still up to more than 75%, which is difficult to further disposal and utilization.

In order to help our customers reduce sludge moisture content and save sludge disposal costs, Works Chemical has independently developed a new sludge dewatering agent, which is different from traditional agents such as polypropylene, ferric chloride, and lime. The amount of new sludge dewatering agent - sludge booster is much smaller than the amount of traditional agents. At the same time, it has a better dehydration effect, and the moisture content can be reduced to about 40%-60% after the use of sludge synergist, which fully realizes the effect of sludge deep dehydration. At the same time, the medicine can completely replace the traditional medicine. Next, Works Chemical will introduce sludge synergists to you:

The sludge enhancer developed by Works Chemical is a chemical agent that can change the surface structure of the sludge, reduce the surface load of the sludge solid, reduce the specific surface area of the sludge surface, and destroy the bacterial structure. The main components are inorganic compounds, sludge surface structure modifier, degreaser, wall breaking agent, sludge surface treatment agent, sludge stripping agent and so on. Sludge enhancer has the advantages of small dosage, low cost, breaking the bottleneck of sludge dewatering, achieving efficient concentration and dewatering, good treatment effect and high cost performance. Combined with the plate and frame mud press, the sludge moisture content can be reduced from more than 90% to 40%-60%, and the sludge reduction can be fully realized.