Sludge dewatering, as the name implies, is to dehydrate the mud after sewage settlement, so that the sludge can be better disposed of. There are many kinds of sludge dewatering agents, common are polyaluminum chloride, polyaluminum ferric chloride, ferric chloride, lime, anionic polyacrylamide, cationic polyacrylamide. So with so many drugs, how do we choose? Which potion is good at dehydrating? Let's discuss it with you at Works Chemical.

Now many sewage treatment enterprises are still using common sludge dewatering agents on the market, such as: polyaluminum chloride, polyaluminum ferric chloride, ferric chloride, lime, anionic polyacrylamide, cationic polyacrylamide. These common sludge dewatering agents, we call it the traditional sludge dewatering agent. These traditional sludge dewatering agents can reduce part of the water in the sludge, the use of these traditional dewatering agents, can only reduce the water in the sludge to about 80%, it can not continue to reduce. And these dehydrating agents use a large amount, need to be used with lime, but also cause corrosion to the equipment, which is undoubtedly an increase in the operating costs of the enterprise.

So what is the sludge dewatering agent that can replace these traditional sludge dewatering agents? Let's come down to Works Chemicall to take you to understand the new sludge conditioner.

Sludge synergist is a new sludge dewatering agent independently developed by Works Chemical. It is a chemical agent that can change the surface structure of the sludge, reduce the surface load of the sludge solid, reduce the specific surface area of the sludge surface, and destroy the bacterial structure. The main components are inorganic compounds, sludge surface structure modifier, degreaser, wall breaking agent, sludge surface treatment agent, sludge stripping agent and so on.

After the use of sludge enhancer conditioning sludge through the plate and frame filter press filtration, the sludge flocculation is compact, the water content is very low, and the weight of the sludge is obviously reduced. The moisture content of the sludge filtered by conditioning pressure can be reduced to 40%-60%. The use of sludge enhancer to treat sludge dewatering does not need to add lime, and the amount is small. It can also effectively improve the mud pressing efficiency of the plate and frame filter press, reduce the mud pressing cycle, and save the cost of sludge disposal for enterprises.