News center
Home - News Center
What are the functions of sludge modification conditioners that can reduce water content by how much

Among various sludge dewatering agents on the market, cationic polyacrylamide is the most common. However, in recent years, a sludge modification conditioner launched by Qingdao Shijun New Materials has become extremely popular and has been favored by many sludge treatment enterprises. The main reason for this is the urgent demand for deep sludge dewatering treatment in the sludge treatment and disposal market. So why does sludge treatment require deep dehydration? What are the benefits of deep sludge dewatering treatment? The manufacturers of sludge modification conditioners are concerned from three aspects.

1、 The deep dehydration reduction effect of sludge modification conditioner is obvious: the water content of sludge produced by sewage treatment plants, chemical plants, industrial enterprises, etc. is mostly over 90%, even up to 99%, in a flowing state. The sludge in this state has a large volume, is prone to pollution diffusion, is difficult to transport, and is difficult to store. Therefore, it is necessary to reduce the moisture content of the sludge and reduce its volume. After being treated with Qingdao Shijun sludge modification conditioner, the sludge moisture content can be reduced to 40% -60%. The sludge modification conditioner fully realizes deep dehydration of sludge.

2、 Deep dehydration with sludge modified conditioners effectively eliminates harmful substances such as odor and bacteria. The sludge is deeply dehydrated by a sludge modification conditioner, forming a dry and hard mud cake with extremely low moisture content. Harmful substances flow out with the water, and the mud cake is non sticky, surface dry, and no longer has a foul odor, which can stabilize the sludge.

3、 Low moisture content mud cakes are more easily utilized as resources. According to relevant national regulations, sludge with a moisture content of less than 60% can be landfilled; The sludge forms a hard block shape in order to be mixed with other substances and sent to the decomposition furnace for combustion. The moisture content of the sludge in this state is about 50%. After treatment, equipment such as plate and frame filter presses, diaphragm filter presses, and box filter presses do not meet the standards, and they still need to be dried with drying equipment, or the mud cake can only meet the standards after being dried for several days. This not only wastes resources and time, but also goes against the original intention of environmental protection.

4、 However, the sludge cake from Qingdao Shijun's modified sludge conditioner, after being filtered by a pressure filter, directly meets the standards for sludge resource disposal.