With the increasing production of sludge, the sludge moisture content is very high, poor dewatering performance, resulting in a sharp increase in the cost of sludge follow-up treatment, through physical, chemical or biological methods to pretreat the sludge, can change the physical properties and chemical composition of the sludge floc, destroy the colloidal structure of the sludge, reduce the affinity between the sludge and water, so as to improve the dewatering performance of the sludge. Adding chemical agents (sludge conditioner) as a chemical conditioning method is widely used because of its simple operation and low cost.

Works Chemical- Sludge conditioner, sludge dewatering synergist manufacturer

Now the most commonly used sludge conditioner on the market are polyacrylamide, ferric chloride, lime and so on. However, the use of these agents not only can not achieve the deep dehydration of sludge, but also a large amount. At the same time, the long-term use of these agents will also cause a certain corrosion of sludge dewatering equipment, reducing the cost of equipment.

In response to the above problems, Works Chemical has successfully developed a new type of sludge conditioner through continuous independent research and development. Sludge conditioner is a chemical agent that can change the surface structure of sludge, reduce the solid surface load of sludge, reduce the specific surface area of sludge and destroy the structure of bacteria.

The role of sludge conditioner:

1. The moisture content of sludge can be reduced to 40%-60%.

2. With the plate and frame filter press, it can effectively improve productivity, improve the mud press efficiency by 100%-- 500%, and reduce the mud press cycle.

3. Effectively reduce the filter cloth change frequency.

4. The amount of sludge conditioner added is small, and lime is not needed.