With the rapid development of the national economy, the output of sludge in China is also increasing, and a large amount of water is generated, and the pollution load is heavy. When the scale of China's sewage treatment plant is expanding step by step, because the disposal cost of sludge accounts for about 50% of the sewage treatment cost, the sludge is not properly disposed of, resulting in secondary pollution, making sewage treatment lose its due significance to some extent. To solve the problem of difficult sludge dewatering, Works Chemical's self-developed sludge dewatering agent can perfectly solve the problem of sludge dewatering.

Works Chemical- Sludge conditioner, sludge dewatering synergist manufacturer

The sludge conditioned by the sludge dehydrating agent can achieve the effect of deep dewatering of the sludge through the press filtration of the plate and frame filter press, and the moisture content of the sludge can be effectively reduced to 35%-55%. The sludge dewatering agent (sludge conditioner) developed by Works Chemical has a better dewatering effect than the common sludge dewatering agent on the market.

Now the more common sludge dehydrating agents on the market are polyacrylamide, polyaluminum chloride, ferric chloride, lime and so on. These traditional sludge dewatering agents have a certain sludge dewatering effect, but their use costs are high, and there are still many problems in use.

For example, these traditional water treatment agents will seriously cause corrosion to the sludge dewatering equipment, cause blockage to the filter cloth and so on, and the use of sludge dewatering agents can effectively avoid these problems, but also effectively improve the efficiency of the dehydration equipment.