The compound conditioner synthesized by the manufacturer of independent intellectual property rights can fully break the wall of the organic biomass in the sludge and then flocculate and dehydrate, with small dosage and high dewatering efficiency, which is conducive to the reduction treatment of the sludge through the dewatering equipment. At the same time, the microstructure of the removed mud cake is loose and breathable, which is very suitable for further drying treatment. Sludge dewatering agents are suitable for sludge preconcentration and sludge dewatering of municipal sewage treatment plants and various industrial and domestic sewage treatment facilities. Sludge dewatering agent has strong adaptability to water quality and high acid and alkali tolerance.

Works Chemical- Sludge conditioner, sludge dewatering synergist manufacturer

Sludge dewatering agent Features of sludge dewatering agent:

1, with the sludge, the formation of fine, strong small floc, greatly reduce the specific resistance of the sludge dehydration process.

2, it can achieve rapid and continuous dehydration of sludge, achieve solid-liquid separation, reduce the moisture content of sludge and the purpose of real reduction.

3, all or part of the replacement of inorganic flocculants will not increase the salt content of the filtrate and improve the operating conditions of the sewage treatment plant. The effect after use

4. It is conducive to reducing the release of intracellular water from the anaerobic reconditioning cell wall membrane and removing free water, bound water, capillary water and intracellular water in most biochemical sludge.

5. After the sludge dewatering treatment by sludge dewatering agent, the sludge volume increment is small, and the mud cake volume is increased by 1.05 ~ 1.20 relative to the absolute dry sludge, which is 50% lower than the increase of the traditional lime method absolute dry sludge, and the subsequent treatment cost is low and the treatment efficiency is increased.

The components of the sludge dewatering agent are more environmentally friendly, non-toxic and harmless, and the production process is simple, avoiding the lime components in the traditional sludge dewatering agent, overcoming the technical defects such as large dosage, serious corrosion of equipment loss and potential harm to the environment, and the performance is better than the existing sludge dispensing and traditional sludge dewatering agents. It has technical advantages and excellent promotion value.