It is well known that pretreatment of sludge by physical, chemical or biological methods can change the physical properties and chemical composition of the sludge floc, destroy the colloidal structure of the sludge, and reduce the affinity between the sludge and water. As a result, the dewatering performance of the sludge is improved, and the addition of chemical sludge conditioner as a chemical conditioning method is widely used because of its simple operation and low cost.

Works Chemical- Sludge conditioner, sludge dewatering synergist manufacturer

Now the most commonly used sludge conditioner on the market are polyacrylamide, ferric chloride, lime and so on. However, the use of these agents not only can not achieve the deep dehydration of sludge, but also a large amount. At the same time, the long-term use of these agents will also cause a certain corrosion of sludge dewatering equipment, reducing the cost of equipment.

In view of the above problems, Weifang Wokos Chemical Co., LTD, through continuous independent research and development, has successfully developed a new type of sludge dewatering agent, which can effectively replace the currently commonly used sludge conditioner in the market. Sludge conditioner is a chemical agent that can change the surface structure of sludge, reduce the solid surface load of sludge, reduce the specific surface area of sludge and destroy the structure of bacteria.

The role of sludge conditioner:

1. Sludge conditioner can reduce the moisture content of sludge to 40%-60%.

2. The sludge conditioner combined with the plate and frame filter press can effectively improve productivity, improve the mud press efficiency by 100%-- 500%, and reduce the mud press cycle.

3. The sludge conditioner effectively reduces the frequency of filter cloth replacement.

4. The amount of sludge conditioner added is small, and lime is not needed.