In the process of industrial wastewater and domestic sewage treatment, a large amount of sludge will be produced. The moisture content in the sludge reaches 95% to 99%, as long as the water is removed, the volume of the sludge will be greatly reduced to facilitate further processing; However, because most of the sludge particles have a certain charge, the dehydration performance is very poor. The sludge conditioner independently developed by Works Chemical can achieve deep dehydration of sludge. Works Chemical sludge conditioner is a chemical agent that can change the surface structure of sludge, reduce the surface load of sludge solids, reduce the specific surface area of sludge surface, and destroy the structure of bacteria.

Works Chemical- Sludge conditioner, sludge dewatering synergist manufacturer

The main components of sludge conditioner are inorganic compounds, sludge surface structure modifier, degreaser, wall breaking agent, sludge surface treatment agent, sludge stripping agent, etc. The sludge conditioner has the advantages of less dosage, low cost, breaking the bottleneck of sludge dehydration, achieving efficient concentration and dehydration, good treatment effect and high cost performance.

Sludge conditioner is widely used in municipal, paper making, mineral processing, printing and dyeing, oil field and other industries of sludge dewatering treatment. Combined with the plate and frame mud press, the sludge moisture content can be reduced from more than 90% to 40%-60%, and the sludge reduction can be fully realized.

After the sludge is conditioned by the sludge conditioner, the pressure of about 1.0MP is injected into the filter chamber of the filter press to efficiently filter out the free water in the sludge, and the sludge accumulates in the filter chamber to reach the design capacity of the filter press. The final dryness of the press dehydrated sludge is not only closely related to the modification effect of chemical conditioning (sludge conditioner), but also closely related to the filling degree of the filter press chamber, the press pressure increase rate, and the press pressure retention time. The use of high pressure feeding and pressing can shorten the time of the whole press section and improve the production efficiency when the chemical conditioning achieves better results.