The residual sludge moisture content discharged by the biochemical system is generally 99.5% ~ 99.8%. After concentration and ordinary mechanical dehydration, the moisture content of the sludge is still as high as 80%, and further drying is still difficult. So how to reduce the water content of the sludge, so that the sludge depth dehydration? Next let Works Chemical sludge dewatering agent manufacturers to solve this big problem for you! Sludge conditioner of sludge dewatering agent manufacturer is a chemical agent that can change the surface structure of sludge, reduce the solid surface load of sludge and reduce the specific surface area of sludge.
Works Chemical- Sludge conditioner, sludge dewatering synergist manufacturer
TPretreatment of sludge before dewatering is called sludge conditioning. The common method is chemical conditioning. It is mainly to add the sludge conditioner of the sludge dewatering agent manufacturer to the sludge to improve its dewatering performance; The chemical conditioning process is simple, the operation is not complicated, and the conditioning effect is very stable. Generally, enterprises will use the plate and frame filter press to add water treatment agents to solve the problem of high sludge moisture content. Many enterprises choose the combination of ferric chloride/aluminum + lime; Polyaluminum chloride + polyacrylamide; Persulfate + lime combined use, etc., but these traditional water treatment chemicals can seriously corrode equipment. Increase the operating costs of enterprises.
TSludge conditioners from manufacturers can effectively solve your sludge water content problems. The sludge conditioner of the sludge dewatering agent manufacturer is used together with the plate and frame filter press, and the moisture content of the mud cake can be reduced to 35%-55%, and the weight loss of the sludge is very obvious. Secondly, the sludge dewatering agent manufacturer obtained through the test that the mud pressing efficiency of the plate and frame filter press can be greatly increased to 100%-500%, which greatly reduces the mud pressing cycle.