The water content of the mud pressed out by the filter press is very high, and the mud is very thin, and the reasons need to be analyzed from several aspects. Such as the plate and frame machine, whether there is a bad water permeation problem of the equipment, the use of dehydrating agent does not match, the sludge is not conditioned and so on, only know the clear reason to solve the problem.

Works Chemical- Sludge conditioner, sludge dewatering synergist manufacturer

1. The filter cloth is blocked.

The clogging of the filter cloth makes the filter water is not good, and the mud is not well separated from the water, so the mud is very thin and the moisture content is very high. The solution is to replace the filter cloth.

2.the use of dehydrating agents do not match.

The sludge dehydrating agent used does not match the mud, does not break the wall of the sludge cells well, and the water is not pressed and filtered well, so the mud is very thin and the water content is very high.

The solution is to replace the sludge conditioner that is better at breaking the wall of the sludge cells.

3. the sludge is not conditioned.

The sludge entering the filter press has not been conditioned, making the filter press filter effect is not good, so the mud is very thin and the water content is very high.

Solution Before the sludge enters the filter press, an agent is added to the conditioning tank for conditioning.