Hello, everyone! Join us at Works Chemical to discuss the problem of sludge compaction. In recent years, with the improvement of environmental awareness, sludge treatment has become a hot topic of concern in various industries. However, many enterprises are faced with a common problem in the treatment of sludge, that is, the high water content of the sludge, resulting in the failure to achieve the ideal sludge drying effect. How did this problem come about?

First of all, we need to understand some of the negative effects of the phenomenon of high sludge moisture content. Sludge compaction can lead to an increase in sludge treatment costs, because sludge with high water content requires longer time and more energy to dehydrate. Moreover, sludge with high moisture content will also increase the workload and cost of enterprises during transportation and disposal.

So, what is the reason for the high water content of the sludge? In fact, it is closely related to sludge dewatering agents. In the actual treatment process, sludge dewatering agents are widely used to improve the dewatering effect and reduce the moisture content.

However, due to the uneven quality of different dewatering agents on the market, many companies often pursue low cost without considering quality when choosing agents. This leads to the poor treatment effect of partial dewatering agents and the inability to effectively reduce the moisture content of the sludge.

The traditional water treatment agent needs to add lime to achieve dehydration effect, which not only corrodes the equipment seriously but also has a high moisture content. So what should we use instead? Sludge conditioner (sludge dewatering agent) does not need to add lime, will not corrode the equipment, will not block the filter cloth; Sludge conditioner is beneficial to sludge incineration, brick making and composting.

For sewage sludge treatment enterprises, it can save costs and is harmless. Used together with the plate and frame filter press, the water content of the mud cake can be reduced by 35%-55%, and the sludge weight loss is very obvious.

Secondly, the mud press efficiency of the plate and frame filter press can be greatly improved to 100%-500%, which greatly reduces the mud press cycle. Therefore, it is very important to improve the quality of sludge dewatering agents to solve the problem of sludge compaction. The selection of sludge dehydrating agent with good effect and reliable quality can avoid the problem of high water content caused by poor agent.

In short, the high moisture content of sludge leads to sludge compaction is a problem that cannot be ignored. It is closely related to the selection and quality of sludge dewatering agents. Only by improving the quality and management ability of agents can better dewatering effects be achieved. At the same time, pay attention to the popularization and improvement of environmental awareness is also the key to solve the problem of sludge treatment. Let's work together and contribute our share to environmental protection!