1. Why can sludge conditioner be favored by enterprises?

In the application of agents for sludge dewatering, cationic polyacrylamide is the most common, but in recent years, a sludge conditioner independently developed and produced by Shijun New Materials has been favored by many sludge treatment enterprises. The reason is mainly due to the urgent demand for deep dewatering of sludge in the sludge treatment and disposal market.

So why deep dehydration for sludge treatment? What are the benefits of deep dewatering of sludge? Sludge conditioner manufacturers from three aspects.

2. Why should sludge treatment be deeply dehydrated?

First, the sludge depth dehydration reduction effect is obvious: sewage treatment plants, chemical plants, industrial enterprises and other sludge moisture content is more than 90%, and even up to 99%, in a flow. The sludge in this state is large in volume, easy to spread pollution, difficult to transport and difficult to store, so it is necessary to reduce the moisture content of the sludge and reduce its volume. The moisture content of the sludge can be reduced to 40%-60% after the sludge conditioning treatment by Shijun New material sludge conditioning agent, which fully realizes the deep dehydration of the sludge.

Second, sludge deep dewatering effectively eliminate foul odor, bacteria and other harmful substances. After deep dehydration, the sludge forms a dry and hard mud cake with very low moisture content, and harmful substances flow out with the water, and the mud cake is non-sticky, the surface is dry, and no longer has odor, which can stabilize the sludge.

Third, low water content mud cake is easier to use as resources. According to the relevant regulations of the state, the sludge moisture content can reach 60% or less to landfill; The sludge forms a hard block before it can be mixed with other substances and sent to the decomposition furnace for combustion, and the moisture content of the sludge in this state is about 50%.

Fourth, the plate and frame filter press, diaphragm filter press, van filter press and other equipment can not meet the standard after processing, but also need to use drying equipment to dry, or the mud cake after several days of drying to reach the standard, not only waste resources, time, but also contrary to the original intention of environmental protection. After the sludge cake tempered by the sludge conditioner of Shijun New material is pressed by the filter press, it directly meets the sludge resource disposal standard.