In the current sludge treatment, polymer inorganic sewage flocculant (sludge conditioner) is usually added for flocculation dehydration, that is, the use of polymer bridge flocculation can also neutralize the negative charge on the sludge, increase the cohesion of ions, and improve the sludge dehydration characteristics. But the actual dehydration effect is not ideal. After dewatering with inorganic sludge flocculant, the water content of sludge is still as high as 80%. So is there a way to reduce the water content even lower?

Yes, in order to help our customers solve the problem of high moisture content of the sludge, after unremitting efforts, our sludge conditioner is a chemical agent that can change the surface structure of the sludge, reduce the surface load of the sludge solid, reduce the specific surface area of the sludge surface, and destroy the bacterial structure. The main components are inorganic compounds, sludge surface structure modifier, degreaser, wall breaking agent, sludge surface treatment agent, sludge stripping agent and so on. Combined with the plate and frame type mud press, the moisture content of the sludge can be greater than 90% ~ 40%-60%, and the sludge reduction can be fully realized.

Sludge conditioner is a sludge conditioner independently developed by Shijun. Sludge conditioner is a chemical agent that can change the surface structure of sludge, reduce the solid surface load of sludge, reduce the specific surface area of sludge and destroy the structure of bacteria. The sludge moisture content after treatment with plate and frame filter press and sludge conditioner can be reduced from more than 90% to 35%-55%, and the sludge reduction can be fully realized.

So what are the advantages of sludge conditioner compared with traditional water treatment agents? The amount of traditional water treatment agent is large, and it needs to be used with lime, which not only has low production efficiency and poor dehydration effect, but also causes corrosion to the dehydration equipment, resulting in clogging of the filter cloth, and greatly increases the operating cost of the enterprise. The sludge conditioner used in conjunction with the plate and frame filter press can not only greatly improve the mud press efficiency of the plate and frame filter press, but also reduce the mud press cycle. It will not corrode the equipment, will not block the filter cloth, and save high operating costs for enterprises.