With the rapid development of the national economy, the output of sludge in China is also increasing, and a large amount of water is generated, and the pollution load is heavy. When the scale of China's sewage treatment plant is expanding step by step, because the disposal cost of sludge accounts for about 50% of the sewage treatment cost, the sludge is not properly disposed of, resulting in secondary pollution. To solve the problem of difficult sludge dewatering, the sludge conditioner developed by Works Chemical is the perfect solution.

The sludge conditioned by the sludge dewatering and curing agent can be filtered by the plate and frame filter press to achieve the effect of deep dewatering of the sludge, and the moisture content of the sludge can be effectively reduced to 35%-55%. Works Chemical's sludge conditioner has a better dewatering effect than the common sludge conditioners on the market, which are polyacrylamide, polyaluminum chloride, ferric chloride, lime and so on.

These traditional sludge conditioners have a certain sludge dewatering effect, but their use costs are high, and there are still many problems in use. For example, these traditional water treatment agents will seriously cause corrosion to the sludge dewatering equipment, cause blockage to the filter cloth and so on, and the use of sludge conditioner can effectively avoid these problems, but also effectively improve the efficiency of the dehydration equipment.