In addition to a small number of large particles suspended impurities in the sewage treatment plant, the solid matter is mainly colloidal particles, and the calyx has a strong affinity with water. Pretreatment of sludge before dewatering can change the physical and chemical properties of sludge particles, destroy the colloidal structure of sludge, reduce its affinity with water, and improve its dewatering performance. This process is called sludge conditioning or conditioning.

There are many methods of sludge conditioning, such as adding medicine, washing, heating, freezing, etc. Among them, the method of adding medicine is economical, practical, simple and convenient, and widely used. Is the dosing method added to the sludge? Coagulants, coagulants, etc., chemical reactions occur on the surface of the sludge colloidal particles, neutralize the charge of the sludge colloidal particles, and promote the condensation of the sludge particles into large particles of flocculent, while making the water particles in the sludge. The separation can improve the dewatering performance of the sludge.

Sludge conditioner is a substitute for lime, iron salt and aluminum salt. Works Chemical's sludge conditioner changes the drawbacks of conventional conditioners by using a variety of functional agents - dehydrating agents, which can completely break the water in the sludge organic matter through the separation agent. The sludge is flocculated and condensed to realize the separation of mud and water. The addition of liquid skeleton greatly improves the subsequent dehydration treatment process. At the same time, the sludge conditioner can pre-add supporting accelerators for the subsequent sludge drying treatment process, which greatly improves the subsequent dry maintenance treatment efficiency.

Works Chemical Sludge Conditioner - a conditioner synthesized by independent intellectual property rights. It can fully break the walls of the organic biomass in the sludge, release water, and then flocculate and dehydrate. Small dosage, high dehydration efficiency. Facilitate sludge reduction through dewatering equipment. At the same time, the microstructure of the dehydrated mud cake is loose and breathable, which is very suitable for further drying treatment.