When it comes to sludge dehydration, many enterprises will start to have a headache. Many companies are using water treatment agents commonly used on the market, and there is still a lot of water in the sludge after these water treatment agents treat the sludge. Some enterprises will use the plate and frame filter press to deal with the sludge dehydration, but the use of the plate and frame filter press to treat the sludge is high, and the sludge moisture content after pressing is as high as 80%; The capacity of a plate and frame filter press is low, and the average output of general sludge is 20-48 hours. It is believed that some enterprises will also use some traditional water treatment agents, which are corrosive to the equipment, increase the loss of equipment, and greatly increase the disposal cost of enterprises.

After the sewage enters the sewage plant, most of the pollutants are concentrated on the sludge, and how to dispose the sludge properly is a major issue. The state has put forward some strategic control standards for sludge treatment. However, the real problem is that the sludge dewatering rate is very low, and the standard requirements are constantly improving. How to reduce the sludge, relieve the pressure of sludge growth, consider the follow-up treatment application, is the current urgent topic. Now Works Chemical is going to solve a new sludge dewatering agent - sludge enhancer.

Sludge enhancer is a kind of chemical agent which can change the surface structure of sludge, reduce the surface load of sludge solid, reduce the specific surface area of sludge and destroy the structure of bacteria. The main components are inorganic compounds, sludge surface structure modifier, degreaser, wall breaking agent, sludge surface treatment agent, sludge stripping agent and so on. The sludge conditioner has the advantages of less dosage, low cost, breaking the bottleneck of sludge dehydration, achieving efficient concentration and dehydration, good treatment effect and high cost performance.