The high moisture content of the mud cake pressed by the plate and frame filter press is a common problem, which may be caused by a variety of factors. In order to solve this problem, you can consider and adjust from the following.....

Selecting the right sludge conditioner can effectively solve the problem of high water content of pressed mud (sludge). Too high water content of sludge will not only affect the efficiency of treatment, but also increase the cost .....

When traditional agents such as ferric chloride and lime are used for sludge dewatering treatment, problems such as high moisture content and unformed sludge compression may indeed occur. This is mainly caused by the following rea.....

The problem that the sludge is too thin after municipal sludge compaction, the moisture content is as high as 83%, and the sludge compaction is not formed may be caused by a variety of factors. The following is a detailed analysis.....

The use of modified polymer products (sludge enhancers) is an effective way to reduce the moisture content of sludge. Sludge enhancers usually contain inorganic compounds, sludge surface structure modifier, degreaser, wall breakin.....

In view of the problems of small and slow municipal sludge feed and high water content, it can be considered and solved from the following aspects: 1. Sludge feeding problem Source control: Check the inlet water quality and q.....