Sludge Booster is a compound conditioner developed and produced by Works Chemical, which can fully break the organic biomass in the sludge wall and release water before flocculating and dewatering. The dosage is small, the dewatering efficiency is high, and the sludge can be reduced by dewatering equipment. At the same time, the microstructure of the removed mud cake is loose and breathable, which is very suitable for further drying treatment. The main components of the sludge enhancer include water purification agent, organic polymer, sludge stripping agent, wall breaking agent degreaser, sludge surface structure modifier and other components. It is a chemical agent that can change the surface structure of the sludge, reduce the solid surface load of the sludge, reduce the specific surface area of the sludge surface, and destroy the bacterial structure.
Sludge enhancer is suitable for sludge preconcentration and sludge dewatering of municipal sewage treatment plants and various industrial and domestic sewage treatment facilities. Sludge enhancer has strong adaptability to water quality and high acid and alkali tolerance.
Action mechanism of sludge synergist:
The main components of sludge synergists change the surface properties of sludge, reduce the specific surface area of sludge, destroy the cell wall and cell membrane, release intracellular water, and then remove free water, bound water, capillary water and intracellular water in most biochemical sludge.
Characteristics of sludge synergist:
1. with the sludge, the formation of fine, strong small floc, greatly reduce the specific resistance of the sludge dehydration process.
2. it can achieve rapid and continuous dehydration of sludge, achieve solid-liquid separation, reduce the moisture content of sludge and the purpose of real reduction.
3. all or part of the replacement of inorganic flocculants will not increase the salt content of the filtrate and improve the operating conditions of the sewage treatment plant.
4. It is conducive to reducing the release of intracellular water from the anaerobic reconditioning cell wall membrane and removing free water, bound water, capillary water and intracellular water in most biochemical sludge.
5. After the sludge dewatering treatment, the sludge volume increment is small, and the mud cake amount is increased by 1.05 ~ 1.20 compared with the absolute dry sludge amount, which is 50% lower than that of the traditional lime method, and the subsequent treatment cost is low and the treatment efficiency is increased.
6. The components of the sludge enhancer are more environmentally friendly, non-toxic and harmless, and the production process is simple, avoiding the lime components in the traditional sludge conditioner, overcoming technical defects such as large dosage, serious corrosion to equipment loss, and potential harm to the environment. The performance is better than that of the traditional sludge conditioner, which has technical advantages and excellent promotion value.