Many customers ask, how to use the plate and frame sludge conditioner, which industries are suitable for? Can the water content come down? In the process of sludge reduction, mechanical dehydration is a common method, and many people will use plate and frame desliming adjuster to improve the dehydration effect. The selection of the right plate and frame desliming adjuster has a key impact on the sludge dewatering effect.

Different types of plate and frame desliming conditioner will be very different. Frame desliming conditioner is a chemical agent that can change the surface structure of sludge, reduce the solid surface load of sludge, reduce the specific surface area of sludge and destroy the structure of bacteria. The main components include inorganic compounds, sludge surface structure modifier, degreaser, wall breaking agent, sludge surface treatment agent and sludge stripping agent.

Frame desliming conditioner is widely used in the dewatering treatment of sludge in various industries such as living, printing and dyeing, paper making, electroplating, mineral processing, oil field and so on. Combined with the plate and frame mud press, the sludge moisture content can be reduced from more than 90% to 40%-60%, to achieve effective reduction.

The following is the use of the frame desliming conditioner:

1. Dissolve the plate and frame sludge conditioner

Add an appropriate amount of plate and frame desliming conditioner into the clean water, stir well, wait until it is completely dissolved, set aside.

2, add the solution to the sludge

 

Remove the sludge to be treated, and slowly add the plate and frame desliming conditioner to the sludge in the stirring state, taking care to fully stir to ensure that the conditioner is in full contact with the sludge.

3, adjust pH value (if necessary)

In some cases, the effect of the plate and frame desliming conditioner needs to be further improved by adjusting the pH value. According to the specific situation, you can use acid, alkali and other substances to adjust. Adjust and mix well again.

4, solid-liquid separation

The conditioned sludge is poured into the plate and frame filter or other similar equipment for solid-liquid separation. In this process, attention should be paid to controlling the feed speed, so as not to affect the separation effect too fast or too slow.

In short, the use of the plate and frame desliming conditioner needs to be determined according to the specific situation, such as the nature of the treatment sludge, water content, treatment process and so on. When used, it should be strictly operated in accordance with the product instructions to ensure its safety and effectiveness.