The sludge composite conditioner synthesized by Works New Materials with independent intellectual property rights can fully break the organic biomass in the sludge and release water before flocculation and dehydration. The dosage is small, and the dehydration efficiency is high, which is conducive to sludge reduction treatment through dehydration equipment. At the same time, the microstructure of the removed mud cake is loose and breathable, making it very suitable for further drying treatment. Works New Material Sludge Dewatering Agent Manufacturer's sludge dewatering agent is suitable for sludge pre concentration and sludge dewatering in municipal sewage treatment plants and various industrial and domestic sewage treatment facilities. Sludge dewatering agents have strong adaptability to water quality and high acid-base tolerance.

Characteristics of sludge dewatering agent manufacturer - sludge dewatering agent:

1. Interacting with sludge to form fine and sturdy small flocs, significantly reducing the specific resistance of sludge dewatering process.

2. It can achieve rapid and continuous dehydration of sludge, achieve solid-liquid separation, reduce sludge moisture content, and truly reduce volume and volume.

3. Manufacturers of sludge dewatering agents - agents that completely or partially replace inorganic flocculants will not increase the salt content of the filtrate and improve the operating conditions of sewage treatment plants.

4. Sludge dewatering agent manufacturer - The agent is beneficial for reducing anaerobic reuse and improving the release of intracellular water from the cell wall membrane, thereby removing most of the free water, bound water, capillary water, and intracellular water in biochemical sludge.

5. Sludge dewatering agent manufacturer - After sludge dewatering treatment by the agent, the sludge volume increment is small, and the increase ratio of sludge cake quantity to absolute dry sludge is 1.05-1.20, which is 50% lower than the increase ratio of traditional lime method absolute dry sludge. The subsequent treatment cost is low, and the treatment efficiency is increased.

6. Works  New Material Sludge Dewatering Agent Manufacturer - The components in the agent are relatively environmentally friendly, non-toxic and harmless, and the production process is simple. It avoids the lime component in traditional sludge dewatering agents, overcomes technical defects such as large dosage, severe equipment wear and corrosion, and potential environmental hazards. Compared to existing sludge conditioners and traditional sludge dewatering agents, it has technical advantages and excellent promotion value.